SELECT LANGUAGE
USEnglish✓ ESEspañol✓
DEDeutschSoon
FRFrançaisSoon
RUРусскийSoon
BRPortuguêsSoon
SAالعربيةSoon
JP日本語Soon
KR한국어Soon
ITItalianoSoon
Inicio > Productos > Car Light Accessories > Controlador de Intermitentes de Estacionamiento | Intermitente de Peligro para Motocicleta | 12V

Controlador de Intermitentes de Estacionamiento - Intermitente de Peligro para Motocicleta

Controlador de destello de estacionamiento ZS-HAZ-REVC - destello de emergencia universal de 4 vías para motocicletas. 9-16V DC, 1A (hasta 15W por lado), consumo en reposo cero, impermeable IP67, T-tap de 3 hilos sin polaridad, 43x22x12mm.
Product Model:ZS-HAZ-REVC
Type:Hazard Flasher Controller (Double Flash)
Operating Voltage:9-16V DC (Nominal 12V)
Max Load Current:15W per side (1A)
Standby Current:0 mA (Zero drain)
Trigger Window:< 1.0s (L→R / R→L)
Reset Time:1-2s (after cancel)
Waterproof Rating:IP67 (Epoxy resin potting)
Dimensions:43 × 22 × 12 mm
Wiring:2 × Yellow + 1 × Black (20AWG, 150mm) + 3 × Red T-tap
Compatible Load:LED turn signal lamps
Quality & Warranty:2-Year Factory Warranty
  • Product Details

Resumen del Producto: Controlador de Intermitentes de Estacionamiento

El MIDCARS es un controlador de intermitentes de estacionamiento universal que añade una función de peligro (doble destello) a las luces de giro LED de su motocicleta, sin cortar un solo cable. Cambie a la izquierda y luego a la derecha (o a la derecha y luego a la izquierda) dentro de 1 segundo y las 4 lámparas de señal de giro parpadearán juntas; presione el botón central de cancelación para salir.

Completamente sin polaridad (ambos cables amarillos son intercambiables), cero consumo en reposo (0 mA) e impermeable IP67 gracias al encapsulado de resina epoxi. Cuerpo compacto de 43 × 22 × 12 mm con arnés de 3 cables y conectores T-tap rojos.

Instalación Fácil de 3 Cables (Sin Cortar Cables)

Dos cables amarillos van a los positivos de la señal de giro izquierda y derecha (en cualquier orden), un cable negro a tierra. Los conectores T-tap rojos se acoplan a los cables existentes en minutos:

  • Yellow → Left turn signal (+)
  • Yellow → Right turn signal (+)
  • Black → Ground / battery (−)
Parking Flasher Controller 3-Wire Wiring Diagram

Cómo Operar

  • Turn ON hazard: switch LEFT → RIGHT (or RIGHT → LEFT) within 1.0 second — all 4 indicators flash together
  • Turn OFF: press the center cancel button (auto-resets in 1–2s)
  • Normal use: factory turn signals work exactly as before

Características Clave y Aplicaciones Típicas

  • Non-polarity design — no wrong way to wire
  • Zero standby drain (0 mA when off)
  • IP67 waterproof — epoxy resin potting
  • Supports LED turn signals up to 15W per side

Aplicaciones: motocicletas, scooters, ATV y UTV con luces de giro LED.

Demostración en Video: Intermitente de Peligro

Preguntas Frecuentes

What does this parking flasher controller do?
It adds a 4-way hazard (double flash) function to your motorcycle LED turn signals, so all four indicators flash together when you need emergency visibility.
How do I turn the hazard mode on and off?
Turn it on by switching the turn signal left then right (or right then left) within 1 second. Turn it off by pressing the center cancel button - it auto-resets in 1-2 seconds.
How do I wire it?
Two yellow wires go to the left and right turn signal positives (interchangeable, non-polarity), one black wire to ground. Red T-tap connectors snap on without cutting wires.
Is it waterproof and does it drain the battery?
Yes - it is IP67 waterproof (epoxy resin potting) and draws 0 mA standby current, so it does not drain the battery when the hazard is off.