Home > Products > Car Light Accessories > Parking Flasher Controller ZS-HAZ-REVC | 4-Way Hazard 12V

ZS-HAZ-REVC Parking Flasher Controller

ZS-HAZ-REVC parking flasher controller - universal motorcycle 4-way hazard flasher. 9-16V DC, 4A (up to 4x12W LED), zero standby drain, IP67 waterproof, non-polarity 3-wire T-tap, 43x22x12mm.
Product ModelZS-HAZ-REVC
TypeParking Flasher Controller (4-Way Hazard)
Operating Voltage9-16V DC (Nominal 12V)
Max Load Current4A (up to 4 × 12W LED)
Standby Current0 mA (Zero drain)
Trigger Window< 1.0s (L→R / R→L)
Reset Time1-2s (after cancel)
Waterproof RatingIP67 (Epoxy resin potting)
Dimensions43 × 22 × 12 mm
Wiring2 × Yellow + 1 × Black (20AWG) + 3 × Red T-tap
Compatible LoadLED turn signal lamps
Warranty2-Year Factory Warranty
  • Product Details

Product Overview: ZS-HAZ-REVC Parking Flasher Controller

The MIDCARS ZS-HAZ-REVC is a universal parking flasher controller that adds a 4-way hazard (double flash) function to your motorcycle LED turn signals — without cutting a single wire. Switch left then right (or right then left) within 1 second and all 4 turn signal lamps flash together; press the center cancel button to stop.

Fully non-polarity (both yellow wires are interchangeable), zero standby drain (0 mA), and IP67 waterproof thanks to epoxy resin potting. Compact 43 × 22 × 12 mm body with a 3-wire harness and red T-tap connectors.

Easy 3-Wire Installation (No Wire Cutting)

Two yellow wires go to the left and right turn signal positives (either way around), one black wire to ground. Red T-tap connectors snap onto the existing wires in minutes:

  • Yellow → Left turn signal (+)
  • Yellow → Right turn signal (+)
  • Black → Ground / battery (−)
ZS-HAZ-REVC Parking Flasher Controller 3-Wire Wiring Diagram

How to Operate

  • Turn ON hazard: switch LEFT → RIGHT (or RIGHT → LEFT) within 1.0 second — all 4 indicators flash together
  • Turn OFF: press the center cancel button (auto-resets in 1–2s)
  • Normal use: factory turn signals work exactly as before

Key Features & Typical Applications

  • Non-polarity design — no wrong way to wire
  • Zero standby drain (0 mA when off)
  • IP67 waterproof — epoxy resin potting
  • Supports LED turn signal lamps up to 4 × 12W

Applications: motorcycles, scooters, ATVs, UTVs with LED turn signals.

Video Demonstration: 4-Way Hazard Flasher

Frequently Asked Questions

What does this parking flasher controller do?
It adds a 4-way hazard (double flash) function to your motorcycle LED turn signals, so all four indicators flash together when you need emergency visibility.
How do I turn the hazard mode on and off?
Turn it on by switching the turn signal left then right (or right then left) within 1 second. Turn it off by pressing the center cancel button - it auto-resets in 1-2 seconds.
How do I wire it?
Two yellow wires go to the left and right turn signal positives (interchangeable, non-polarity), one black wire to ground. Red T-tap connectors snap on without cutting wires.
Is it waterproof and does it drain the battery?
Yes - it is IP67 waterproof (epoxy resin potting) and draws 0 mA standby current, so it does not drain the battery when the hazard is off.